Canopy on pillars are produced from ironed concrete colored in mass.
They are available in four sizes and in three basic colors.
Sizes are adjusted for pillars glued with elevation slabs or built from clinker bricks.
| Canopy for gabble roof pillars |
| Model |
Dimensions (cm) |
Weight size kg |
Palette size |
Palette kg |
| Length |
Width |
Height of End |
Height of Centre |
| DS 30 |
30 |
30 |
3,5 |
4,8 |
6,6 |
80 |
528 |
| DS 42 |
42 |
42 |
3,5 |
5,5 |
13,2 |
40 |
528 |
| DS 46 |
46 |
46 |
3,5 |
5,5 |
16,4 |
40 |
656 |
| DS 50 |
50 |
50 |
4 |
6 |
19,2 |
40 |
768 |
In continuous sale the colors brown and red are available.
Graphite color is on order and the latency is about 2 weeks.
For orders over 100 arts the colors grey, cherry, sand and yellow are produced. The latency is from 2 to 4 weeks.
| Canopy for hip roof pillars |
| Model |
Dimensions (cm) |
Weight size kg |
Palette size |
Palette kg |
| Length |
Width |
Height of End |
Height of Centre |
| DS 50 |
42 |
42 |
5,5 |
7 |
16,5 |
40 |
660 |
Canopy for hip roof pillars are one of the elements of fencing produced from modified concrete.
There is three colors available: yellow, brown and graphite.
From the bottom side they own a capillary therefore it is impossible for the water to flow underneath the canopy.
The span of the canopy edge from the edge of the pillar should be minimum 25mm from each side e.g. canopy of the size 42 x 42 cm can be installed on a pillar size no greater than 37 x 37 cm. |
