F I R S T   T H E R E   W A S   A   S T O N E . . .
Tel: 604.552.2115
Fax:604.552.0401
 
Products  
Canopy for Pillars Canopy on Pedestals Fencing Systems Decorative Fencing Elements

Product

/ Canopy on pedestals

 


Canopy for pedestals are produced from tabloid concrete colored in mass.
They are available in five sizes and in three basic colors.

Sizes are adjusted for pillars glued with elevation slabs or built from clinker bricks

Canopy for gabble roof pillars
Model Dimensions (cm) Weight size/kg Palette size

Palette kg

Length Width Height of End Height of Centre
DC 17 17 60 3,5 4,2 7,4 100 740
DC 20 20 60 3,5 4,5 8,4 100 840
DC 25 25 60 3,5 4,7 10,3 60 620
DC 34 34 60 3,5 5,0 13,0 50 650
DC 40 40 60 3,5 5,3 17,4 40 700

In continuous sale the colors brown and red are available.
Graphite color is on order and the latency is about 2 weeks.
For orders over 100 arts the colors grey, cherry, sand and yellow are produced. The latency is from 2 to 4 weeks.

Canopy for hip roof pillars
Model Dimensions (cm)

Weight size/kg

Palette size

Palette kg

Length Width Height of End Height of Centre
DC 50 64 26 5,5 6,5 15,5 50 780

Canopies for pedestals are one of the elements of fencing produced from modified concrete.
There is three colors available: yellow, brown and graphite.
From the bottom side they own a capillary therefore it is impossible for the water to flow underneath the canopy.
The span of the canopy edge from the edge of the pedestal should be minimum 25mm from each side e.g. canopy of the size 25 x 60 cm can be installed on a pedestal size no greater than 20cm.





Stegu 2006